We’re pairing up our Scara v4 Printer with our newest pump! This duo has become the most versatile and convenient way of printing large-scale architecture and other structures.
Scara v4 + Small 50 Pump
Multipurpose Pumping Machine
The SMALL 50 can operate continuously on 110v 20 amp service. This machine has the ability to pump up to 3.5 gallons of material per minute through 85 ft. of 1″ hose. Start pumping with the new variable flow rate from 1.7 to 30 cubic feet per hour. Easy to use, easy to clean, it’s a money-making machine!
The 3D Potterbot Scara V4 is our largest model for 3D ceramic and paste printing. It is capable of printing multiple large objects non-stop. It can even be paired up with a Continuous Flow hopper to even print structures and walls.
The Scara V4 is the first viable large-scale ceramic 3D printer using real clay. The advanced design and substantial construction can handle onboard loads like the 3D Potter 3600 ml clay extruder or a hose assembly. But where it really shines is when it's coupled with our new large capacity continuous high-pressure hose extrusion system. We can now deliver clay loads between 85 - 250 lb continuous extrusion.
The build envelope diagrams represent the 45 in Z height. We can do custom Z heights up to 9 feet and diameters up to 8.5 feet.
The Scara V4 build envelope is quite unique because it's capable of printing 360 degrees with continuous rotation. This means you can create a huge vessel with the printer initially residing inside the vessel or structure. This opens up a whole another opportunity to print small habitat structures (houses). Larger printers are available for this potential habitat project.
Another unique ability is printing multiple objects within the specified envelope in a sequential mode. For instance, you could print a particular vessel starting on the far left side and continue to print these vessels until there is no more space left.
X/Y- 72" Diameter Circle (1829mm)
Z- 45” (1143mm)
W-34” L-18” H-44”
Normal operational space needed: W-40” L-36” H-~70”
Maximum operational space needed: W-88” L-88” H-~84”
Height to the top of the extruder fully extended is H~84” (2134mm)
Weight with extruder: 90 lbs. (41kg)
Average speed: 1.2’’ to 3.9’’/s (30 to 100 mm/s)
Power Supply: Output - 24V ~15 amps, Input - 110-220V, 50-60 Hertz.
Power consumption: 24V ~10 amps, ~240 Watt
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4
Full control through the web interface, no apps or software installation. Non-WiFi versions are available, please contact us if you would like this type of connection (Ethernet connection).
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.